Loading ...
Loading ...
Loading ...
9
ASSEMBLY
Chute Support
Bracket
Chute Control Head
Chute
Assembly
Chute Base
d
a
c
b
Figure 13
2. Secure chute control head to chute support bracket with
clevis pin (c) and cotter pin (d) removed in Step 1 (Figure 14).
c
d
Figure 14
3. Finish securing chute control head to chute support bracket
with wing nut (a) and hex screw (b) removed in Step 1
(Figure 15).
b
a
Figure 15
4. Insert chute control rod into the support bracket on rear of
the dash panel (Figure 16).
Figure 16
5. Remove hairpin clip (a) from rear of chute control head
(Figure 17).
a
b
Figure 17
6. Insert chute control rod (b) into rear of chute control head
(Figure 17) and secure with hairpin clip (a) removed in Step 5.
STOP
Continue to Set-Up (page 14).
Overhead Chute Rotation Control w/ 2-Way
Pitch or 4-Way Pitch & Rotation Control
2 Way/4 Way
Control
Chute Control Rod
Chute Assembly
Figure 18
1. Remove hairpin clip (a), wing nut (b) and hex screw (c) from
chute control head and clevis pin (d) and bow-tie cotter pin
(e) from chute support bracket (Figure 19).
Loading ...
Loading ...
Loading ...