Loading ...
Loading ...
Loading ...
ANTI-BANDING
ANTI-BANDING is to prevent the phenomenon of
horizontal lines (banding) when photographing images
in low frequency light or high brightness environments.
Note:
ANTI-BANDING is only supported by Type I camera.
3.3 LIGHTNING SETTINGS
Note:
LIGHTNING SETTINGS is only supported by Type II
camera.
LIGHTNING MODE
You can set the LIGHTNING MODE to IR or WHITE
LIGHT.
IR
Set the LIGHTNING MODE to IR.
IR LIGHT
You can turn on/off the IR LIGHT to meet the
requirements of different circumstances.
SMART IR
The Smart IR function is used to adjust the light to its
most suitable intensity, and prevent the image from
over exposure. The SMART IR value can be adjusted
from 0 to 3 as shown below. The greater the value is,
the more obvious effects are.
LIGHTNING SETTINGS
MODE
IR LIGHT
SMART IR
D-N THRESHOLD
N-D THRESHOLD
BACK
EXIT
SAVE&EXIT
AUTO
ON
2
2
7
Figure 3-3 DAY/NIGHT
DN THRESHOLD (Day to Night Threshold)
Day to Night Threshold is used to control the sensitivity
of switching the day mode to the night mode. You can
set the value from 1 to 9. The larger the value is, the
more sensitive the camera is.
ND THRESHOLD (Night to Day Threshold)
Night to Day Threshold is used to control the sensitivity
of switching the night mode to the day mode. You can
set the value from 1 to 9. The larger the value is, the
more sensitive the camera is.
WHITE LIGHT
Set the LIGHTNING MODE to WHITE LIGHT.
WHITE LIGHT
You can set the WHITE LIGHT as AUTO or OFF.
AUTO
Under the AUTO mode, the white light turns on
automatically as the environment becomes dark.
The THRESHOLD is the environmental light level at
which the white light turns on. You can set the value
from 1 to 3. The greater the value is, the darker the
environment should be to activate the light.
The value of LEVEL controls the brightness of the white
light. The greater the value is, the brighter the light is.
OFF
Loading ...
Loading ...
Loading ...