Loading ...
Loading ...
Loading ...
STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC 33
PROBLEM CAUSE SOLUTION
String trimmer
stops while
cutting.
◾
The guard is not mounted
on the trimmer, resulting in
an overly long cutting line
and motor overload.
◾
Remove the battery pack and mount the
guard on the trimmer.
◾
Heavy cutting line is used.
◾
Use recommended nylon cutting line with
diameter no greater than 0.095 in.
(2.4 mm).
◾
The drive shaft or trimmer
head is bound with grass.
◾
Stop the trimmer, remove the battery, and
remove the grass from the drive shaft
and trimmer head.
◾
The motor is overloaded.
◾
Remove the trimmer head from the
grass. The motor will recover as soon as
the load is removed. When cutting, move
the trimmer head in and out of the grass
to be cut and remove no more than 8
inches (20 cm) of length in a single cut.
◾
The battery pack or string
trimmer is too hot.
◾
Allow the battery pack or trimmer to cool
until the temperature drops below 152°F
(67°C).
◾
The battery pack is
disconnected from the tool.
◾
Re-install the battery pack.
◾
The battery pack is
depleted.
◾
Charge the battery pack with EGO
chargers listed in power head manual.
Loading ...
Loading ...
Loading ...