Nespresso ENV300. W document

Loading ...

10. The buons blink three times rapidly to conﬁrm new seing.

11. The machine is now reprogrammed with the new water hardness seing

and turns automatically in ready mode.

3. Plug in the power cord.

4. Make sure that no accessory (milk carafe or descaling pipe) is connected

to the milk carafe connector hatch.

5. Turn the machine on.

NOTE: Programming the machine according to the actual hardness of the

local water supply ensures a longer lifetime for the appliance, as well as opti-

mizing the descaling process.

6. Press hot foam buon for three seconds to enter the menu mode.

7. Clean and descale alerts blink together.

8. Press cappuccino buon , the system proposes one out of the ﬁve

combinations. If the selection is not done within 15 sec., it exits automati-

cally.

9. Set the hardness level by pressing the corresponding buon in below ta-

ble (within 15 seconds).

Water hardness Buon to press fH dH CaCO3

< 5 < 3 < 50mg/l

> 7 > 4 > 70mg/l

> 13 > 7 > 130mg/l

> 25 > 14 > 250mg/l

> 38 > 21 > 380mg/l

Loading ...

Nespresso ENV300. W Lattissima Vertuo Pod Coffee Machine - White