Loading ...
Loading ...
Loading ...
39
The machine doesn’t start and the
lights blink irregularly.
• Fill the water tank and push the buon to start.
• Check that handle is properly locked.
Lights blink while machine is run-
ning.
• If coee or milk is flowing normally, this indicates the machine
is working properly.
• If only water is flowing, the machine is executing a user request
for either cleaning, descaling or emptying the system. Refer to
the corresponding section in this user manual.
Lights blink and the machine is not
running.
• It takes some time before the coee flow comes out (due to
code reading and pre-weing the coee).
• Check that a fresh capsule is inserted in the correct position and
that the handle is properly locked, and then push the buon
to start.
• Fill the water tank and push the buon to start.
• Turn the machine to “OFF mode” by pushing the coee buon
for 3 seconds and then push it again to turn the machine ON.
Now wait approximately 20 minutes to allow the machine to
cool down aer extensive use.
Lights blink irregularly.
Machine is not running.
• During regular Coee/Espresso preparation: 1) Unlock the han-
dle and open the machine head to check that a fresh undam-
aged capsule is inserted in the correct position. 2) Check that
the handle is in “LOCKED” position. 3) Check that the water
tank is filled.
• During Descaling, Emptying and Cleaning: 1) Check that cap-
sule is ejected. 2) Check that the handle is in “LOCKED” posi-
tion.
• During Programming Volume: 1) Check if a capsule has been
well inserted. 2) Please refer to the corresponding chapter.
• If problem persists:
• 1. Unlock the handle and open machine head.
• 2. Replace capsule (if necessary).
• 3. Disconnect the power cord from the outlet and plug the ma-
chine back into outlet aer 10 seconds.
• 4. Close the machine and press the buon to turn it ON and
press again to start brewing. If problem persists, call Nespresso.
Descaling alert blinks or is fixed
orange.
• The machine triggers descaling alert according to your bever-
age consumption. Descale the machine. Refer to “Descaling”
section related to your beverage consumption.
Rinse alert blinks orange. • The milk carafe requires a rinse cycle; refer to section “Milk
Preparation & Daily rinsing”.
You cannot enter the Menu Mode
(Reset to factory seings/ Empty-
ing the system before a period of
non-use/Water hardness seing).
• Be sure to remove the milk carafe from the connector hatch.
• Be sure that the descaling pipe is not connected to the connec-
tor hatch.
• Press and hold hot foam buon
until descale and rinse
alerts blink.
Loading ...
Loading ...
Loading ...