Loading ...
Loading ...
Loading ...
12
Note: When properly installed, the tamper holder will not interfere
with blender operation. The tamper holder can be installed on the
left or right side of the motor base.
1. Clean the parts by hand with warm, soapy water or in the top rack
in the dishwasher before assembling.
2. Choose a side of the motor base to install the tamper holder.
3. Put the tamper holder cup onto the tamper holder base. Twist the
tamper holder cup clockwise to lock into place.
4. Lift up the blender base. Plug the tab in the tamper holder base
into the slot in the motor base. Lower the blender base back onto
the work surface or counter.
5. Make sure the blender is sitting flat and steady (no rocking side
to side) before blending. When installed properly, the inside flat
surface of the tamper holder cup will sit flush with the side of the
blender (See illustration).
6. Remove the tamper holder from the blender regularly to clean. To
remove the tamper holder cup, rotate the cup counter-clockwise.
7. To remove the base, lift up on the motor base and remove the
tamper holder base.
Proper installation
(flush against motor base)
The tab on the
tamper holder base
can be plugged into
the motor base here
or here
Tab on Tamper
Holder Base
Motor Base
ta mp e r ho l de r
Loading ...
Loading ...
Loading ...