Loading ...
Loading ...
Loading ...
6 Permanent settings in programming mode
17
en
fr
es
pt
6 Permanent settings in programming mode
In programming mode you can set the switch-off time and water
hardness. Press the f button to enter programming mode. Press
the f button again to exit this mode.
By instructing your ENA to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your ENA switches off automatically after the preset time following
the last action on the machine.
The number of symbols that are brightly lit up indicates the
activated switch-off time:
Switch-off time Symbol(s) shown in display
30minutes
s
1hour
s s
2hours
s s s
4hours
s s s £
Example:Proceed as follows to change the switch-off time from
30minutes to 1hour.
T
Press the f button.
The & symbol lights up brightly.
T
Press the
]
button several times until the ü symbol lights up
brightly.
T
Press the s button to enter the program item.
T
Press the
[
/
]
button to change the setting for the switch-off
time.
Press the s button to confirm the setting.
E The setting must be confirmed within 20 seconds.
The sss£ symbols flash 3 times in quick succession.
E The automatic switch-off can also be set using the JURA app
(J.O.E.
®
).
Automatic switch-off
Loading ...
Loading ...
Loading ...