Loading ...
Loading ...
Loading ...
Use the Product
Make Measurements 3
3-9
View Test Readings on the Screen
This is a typical display of battery test in Meter mode.
hsz028.jpg
This is a typical display of battery test in Sequence mode:
hsz031.jpg
Battery number: Indicates the number of the battery that has been tested.
Progress bar: The progress bar is generated according to the total number of batteries
in the profile. Each cell corresponds to one battery. An empty cell indicates the
corresponding battery is not tested yet. A full cell indicates the corresponding battery has
been tested and the readings have been saved. A cross mark in a full cell indicates that
the threshold function is enabled.
Cursors: Use and to move the cursors. The number of the currently tested battery
changes accordingly. When the cursors are positioned on a full cell, the corresponding
reading of that battery will be shown under the progress bar.
Average readings: After two or more sets of test readings are saved, the Product
shows the average readings, including average resistance and average voltage.
Tip: If the test readings of a battery are significantly different from the average readings,
it could indicate the battery health has been compromised.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...