Loading ...
Loading ...
Loading ...
6
WET VACUUMING:
Your Bennett Read Tough 12 can also suck up liquids* in and around your home.
Please note that the Bennett Read Tough 12 is NOT a carpet deep cleaner. Carpet deep cleaning
should be done with a specialised deep cleaner such as the Bennett Read ONE.
Setting up your Bennett Read Tough 12 for wet vacuuming:
1. Remove the Motor Unit (2) from the Dirt/Water Tank (4) as explained on page 4
2. Remove the Filter Bag (16) from the Dirt/Water Tank in the reverse order as shown in step 2 on
page 5
TIP:
To firmly attach the Extension
Wand and accessories together,
give a slight twist once joined.
10. Alternatively, when dry vacuuming,
attach the Combination
Crevice/Upholstery Tool (19) to suit
your cleaning needs:
IMPORTANT: The Filter Bag MUST be removed before vacuuming any liquids
3. Install the Wet Vacuum Foam Filter (17) as
shown below:
4. Fit the Foam Filter Securing Lock (18) and
turn clockwise until secure as shown below:
7. Plug the Power Cable (9) into a wall socket
8. Switch your Tough 12 on using the Power Switch (1)
9. Vacuum in different directions across your surfaces for best results
After each cleaning session it is advisable that the Filter Bag (16) be emptied and thoroughly rinsed
and dried before storing.
https://manual-hub.com/
Loading ...
Loading ...
Loading ...