Loading ...
Loading ...
Loading ...
English
12
Troubleshooting Guide
if the fittings will not seal properly:
1. Check to see if the expander head is screwed
ontightly.
‑ Tighten thehead.
2. Check to see if the exapnder head segments are
bent ormisaligned.
‑ Replace the expanderhead.
3. Are the expander head segments not properly
contracting between expansions?
‑ Clean and relubricate the expanderhead.
‑ Check to see if the expander cone is
properlylubricated.
‑ Clean and relubricate the expandercone.
4. has the fitting been damaged?
‑ Replace thefitting.
5. Was the PEX tubing removed while the expander
cone was in the expanded postion?
‑ For PEX Tubing 1" (25mm) and below, cut 2" (50
mm) off the end of the PEX tubing and restart the
procedure with a new PEX ring.
‑ For PEX Tubing larger than 1" (25mm), cut 2-3/5"
(66mm) off the end of the PEX tubing and restart the
procedure with a new PEX ring.
6. is the PEX tubing and Ring dry?
‑ Wipe dry with a clean, lint-freecloth.
7. is there grease from the expander head inside the
PEX tubing?
‑ Wipe off all grease from inside the PEX tubing and
relubricate the expanderhead.
The Ring slides during the expansion process:
1. is the PEX tubing and Ring dry?
‑ Wipe dry with a clean, lint-free cloth
2. Are your hands clean and dry?
‑ Make sure your hands are clean and dry. Oils from
your hands can lubricate the PEX tubing andRing.
3. is the Ring being held properly in place?
‑ Use your thumb to hold the ring in place for the first
couple ofexapansions.
Three‑Year Limited Warranty
For warranty terms, go to https://www.dewalt.com/
support/warranty.
To request a written copy of the warranty terms, contact:
Customer Service at D
eWALT Industrial Tool Co., 701East
Joppa Road, Towson, MD 21286or call 1-800-4-DeWALT
(1-800-433-9258).
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country-specific warranty information contained in
the packaging, call the local company or see website for
warrantyinformation.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1-800-4-
DeWALT
(1-800-433-9258) for a freereplacement.
Register Online
Thank you for your purchase. Register your product nowfor:
• WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with yourproduct.
• COnFiRMATiOn OF OWnERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof ofpurchase.
• FOR YOUR sAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification
is required under the Federal Consumer SafetyAct.
• Register online at www.dewalt.com.
Repairs
The charger and batteries are notserviceable. There are no
serviceable parts inside the charger or batterypack.
WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including
brush inspection and replacement, when applicable)
should be performed by a factory service center or
an authorized service center. Always use identical
replacementparts.
Tool Connect™ Chip (Fig.L)
Optional Accessory
Your tool is Tool Connect™ Chip ready and has a location for
installation of a Tool Connect™ Chip.
Tool Connect™ chip
15
communicates with an optional
application for your smart device (such as a smart phone
or tablet) that connects the device to utilize the mobile
application for inventory management functions.
Refer to Tool Connect™ Chip Instruction Sheet for
moreinformation.
installing the Tool Connect™ Chip
1. Insert the Tool Connect™ Chip
15
into the
emptypocket
14
.
2. Ensure that the Tool Connect™ Chip is flush with the
housing. Secure it with the retaining screws
16
and
tighten thescrews.
3. Refer to Tool Connect™ Chip Instruction Sheet for
furtherinstructions.
Loading ...
Loading ...
Loading ...