Hikvision DS-2TD2117-6/PAI User Manual

Loading ...

Steps

Check Enable Auto Trigger.

Set Trigger Time, and the device will trigger an alarm output to the alarm server automacally in

the set

me.

Set Auto Trigger Delay. It refers to the me duraon that the alarm output remains in eect

aer

the auto trigger.

Click Save.

9.2.2 FTP/NAS/Memory Card Uploading

If you have enabled and congured the FTP/NAS/memory card uploading, the device sends the

alarm

informaon to the FTP server, network aached storage and memory card when an alarm is

triggered.

Refer to Set FTP to set the FTP server.

Refer to

Set NAS for NAS conguraon.

Refer to Set Memory Card for memory card storage conguraon.

9.2.3 Send Email

Check Send Email, and the device sends an email to the designated addresses with alarm

informaon when an alarm event is detected.

For email

sengs, refer to Set Email .

Set Email

When the email is congured and Send Email is enabled as a linkage method, the device sends an

nocaon to all designated receivers if an alarm event is detected.

Before You Start

Set the DNS server before using the Email funcon. Go to Conguraon → Network → Basic

Sengs → TCP/IP for DNS sengs.

Steps

Go to email sengs page: Conguraon → Network → Advanced Sengs → Email .

Set email parameters.

1) Input the sender's email

informaon, including the Sender's Address, SMTP Server, and

SMTP Port.

Oponal: If your email server requires authencaon, check Authencaon and input your

user name and password to log in to the server.

3) Set the E-mail

Encrypon.

Thermal Network Camera User Manual

Loading ...

Hikvision DS-2TD2117-6/PAI Thermal Network Bullet Camera