Hikvision IDS-TCVK00-FI Operation User Manual

Loading ...

Select it when the two network interfaces are connected to two network cables respecvely.

When one network interface fails, the other network interface will be employed

automacally without inuencing the data transmission.

Mul-Network Isolaon

Select it when dierent LANs are connected. Set the IP addresses of dierent network

segments.

Note

The dual-NIC mode varies with dierent models. The actual device prevails.

Set network parameters.

NIC Type

Select a NIC (Network Interface Card) type according to your network condion.

IPv4

Two modes are available.

DHCP

The device automacally gets the IP parameters from the network if you check DHCP. The

device IP address is changed aer enabling the funcon. You can use SADP to get the device

IP address.

Note

The network that the device is connected to should support DHCP (Dynamic Host

Conguraon Protocol).

Manual

You can set the device IP parameters manually. Enter IPv4 Address, IPv4 Subnet Mask, and

IPv4 Default Gateway.

IPv6

Three IPv6 modes are available.

Route Adversement

The IPv6 address is generated by combining the route adversement and the device Mac

address.

Note

Route adversement mode requires the support from the router that the device is

connected to.

DHCP

The IPv6 address is assigned by the server, router, or gateway.

Manual

Network Trac Camera Operaon Manual

Loading ...

Hikvision IDS-TCVK00-FI 20 MP IR ANPR Checkpoint Capture Unit