
150KG STAIR CLIMBING SACK TRUCK
WITH SOLID TYRES
MODEL NO: CST985.V3
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
9 Always load evenly with the centre of gravity of the load as low as possible.
9 Use additional support for large or wide loads to prevent movement.
9 When used on steps or stairs ensure that the load is well within your capability to lift and control.
9 Make multiple trips rather than exceed your lifting capabilities.
8 DO NOT overload the truck - maximum capacity 150kg.
8 DO NOT allow others to ride on the truck.
8 DO NOT use the truck if any part is damaged.
2. INTRODUCTION
Tubular steel construction gives 150kg maximum load capacity. Deep foot ensures cartons stay on trolley during transit. Fitted with
solidrubberwheels.Handledesignallowsarmgripwhilstascendinganddescendingstairways.Idealfordeliverydriversand
couriers.
3. SPECIFICATION
Model No: ..........................................................CST985
Capacity: ............................................................... 150kg
Height(s): .......................................................... 1300mm
Overall Width: ..................................................... 510mm
Platform Depth: ...................................................230mm
Wheel Size: ...................................................... Ø165mm
Wheel Width: .........................................................30mm
4. ASSEMBLY
NOTE: Numbers/Letters in brackets refer to the parts in (Fig 1.)
4.1. Slide axle (C) through tubes (A).
4.2. Fit wheel assembly (1) to each end of axle and retain with plain
washers and nuts (2).
4.3. Slide handle (D) over tubes (B) and retain with bolts, plain washers
and nuts (2).
CST985.V3Issue3(H,2,3,F)12/06/23
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
Note:Itisourpolicytocontinuallyimproveproductsandassuchwereservetherighttoalterdata,specificationsandcomponentpartswithoutpriornotice.
Pleasenotethatotherversionsofthisproductareavailable.Ifyourequiredocumentationforalternativeversions,pleaseemailorcallourtechnicalteam
on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty:Guaranteeis12monthsfrompurchasedate,proofofwhichisrequiredforanyclaim.
g.1
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomescompletelyunserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersand
dispose of the product and fluids according to local regulations.
REGISTER YOUR
PURCHASE HERE
