Loading ...
Loading ...
Loading ...
Snow thrower controls and features are described below and
illustrated in Fig. 4-1.
Speed Selector Lever
The speed selector lever is located in the right
side of the handle panel and is used to determine
ground speed and direction of travel.
Forward
There are six forward (F) speeds. Position one (1) is
the slowest and position six (6) is the fastest.
Reverse
There are two reverse (R) speeds. One (R1) is the
slower and two (R2) is the faster.
Choke Control
The choke control is found on the rear of the
engine and is activated by rotating the knob
clockwise. Activating the choke control closes
the choke plate on the carburetor and aids in
starting the engine.
Ignition Key
The ignition key is a safety devise. It must be
fully inserted in order for the engine to start.
Remove the ignition key when the snow
thrower is not in use.
IMPORTANT: Do not turn the ignition key in
an attempt to start the engine. Doing so may
cause it to break.
Figure 4-1
Primer
Choke
Throttle
Starter Handle
Oil Drain
Electric
Switch Box
Electric
Start
Button
Oil Filler
Cap/Dipstick
Key
Fuel Fill
Cap
Wheel Drive Control
Speed Selector Lever
Two Way Chute Pitch Control™
Auger Control
Wheel Steering Control
Chute Directional Control
Skid Shoe
Clean-Out Tool
Chute Assembly
Oil Fill
Fuel Cap
Fuel Tank
Headlight
Augers
Controls and Features
4
13
Loading ...
Loading ...
Loading ...