Loading ...
Loading ...
Loading ...
6
AXIS P5532-E/P5534-E - Product Description
Control button - The control button is used for
• Connecting to an AXIS Video Hosting System service, see page 33. To connect, press and hold the button until the
Status LED flashes green.
• Connecting to AXIS Internet Dynamic
DNS Service, see page 33. To connect, press the button once.
• Restoring the camera to factory default settings, see Resett
ing to Factory Default Settings, on
Resetting to the Factory
Default Settings,
on page 39.
Restart button - Press the button to restart the camera.
Serial number label - Part number (P/N) and Serial number (S/N). The serial
number may be required during installation.
SDHC memory card slot - A standard or high capacity SD memory card (not
included) can be used for local recording with
removable storage. To insert and remove an SD card, the camera’s sunshield and top cover must first be removed; for
instructions please refer to the Installation Guide.
Note:
Bef
ore removal, the SD card should be unmounted to prevent corruption of recordings. To unmount the SD card, go to
Setup > System Options > Storage > SD Card and click Unmount.
Status Indicators
After the startup ad self test routines the indicator flashes as follows.
See also
LED Indicator flash routine,
on page 44.
Unit Color Description
AXIS P5532-E
AXIS P5534-E
Unlit Steady during connect
ion/normal operation.
Amber Steady during system
initiating. Flashes during firmware upgrade and reset to fac-
tory default.
Amber/red No network connection
Red Firmware upgrade failure.
Green Steady for 10 sec. after successful restart.
Unit LED Color Description
AXIS T8123 Port Unlit No camera connected.
Yellow Insufficient power for camera and heater. Ch
eck cable.
Flashing Power overload
Green Camera connected, normal behavior.
AC input Steady green AC power connected.
Loading ...
Loading ...
Loading ...