LG Electronics WTL3-09W 9kg Series 3 Top Load Washing Machine

Owner’s Manual English - Page 11

For WTL3-09W.

PDF File Manual, 40 pages, Download pdf file

Loading ...
Loading ...
Loading ...
11
INSTALLATION
ENGLISH
If it is impossible to avoid positioning the
appliance next to a gas cooker or coal burning
stove, an insulation (85 X 60 cm) covered with
aluminium foil on the side facing the cooker or
stove must be inserted between the two
appliances.
Ensure that when the appliance is installed, it is
easily accessible for a service technician in the
event of a breakdown.
Additional clearance for the wall should have
10
cm
for the rear and
2 cm
for right and left side.
WARNING
This appliance must only be used for domestic
household purposes and should not be used
with movable home or house.
NOTE
Do not install this appliance on a raised surface
or platform, plinth or stand. It may cause injury
or serious malfunctioning.
Ventilation
Make sure that air circulation around the
appliance is not impeded by carpets, rugs, etc.
Ambient Temperature
Do not install the appliance in rooms where
freezing temperatures may occur. Frozen hoses
may burst under pressure. The reliability of the
electronic control unit may be impaired at
temperatures below freezing point.
If the appliance is delivered in winter and
temperatures are below freezing, place the
appliance at room temperature for a few hours
before putting it into operation.
Electrical Connection
Do not use an extension cord or double adapter.
Always unplug the appliance and turn off the
water supply after use.
Connect the appliance to an earthed socket in
accordance with current wiring regulations.
The appliance must be positioned so that the
plug is easily accessible.
Power outlet must be within 1.5 meters of either
side of the appliance.
WARNING
Repairs to the appliance must only be carried out
by qualified personnel. Repairs carried out by
inexperienced persons may cause injury or
serious malfunctioning. Contact your local
authorised LG repairer.
The power plug must be plugged into an
appropriate outlet socket that is installed and
grounded/earthed in accordance with all local
codes and ordinances.
Connecting the Water Inlet
Hoses
Before connecting the water inlet hose to the water
tap, check the hose fitting type and follow the
instructions for that hose fitting.
Note for Connection
Water supply pressure must be between
30 kPa
and
600 kPa
(0.3 - 6.0 kgf / cm²). If the water
supply pressure is more than
600 kPa
, a
decompression device should be installed.
Periodically check the condition of the hose and
replace the hose if necessary.
10 cm
2 cm 2 cm
Loading ...
Loading ...
Loading ...