Loading ...
Loading ...
Loading ...
V7
(x6) _
\ 0
~
'"
,:
,
®
i
Ducted installation - rear (horizontal) blower output
18”
11.3”
Mounting, Part I:
It is recommended for the center of the range hood
to be approximately 26” - 28” above the cooktop,
for best capture performance.
1.) Measure 16”-18” from the cooktop to the bottom
of the hood.
2.) Remove the mounting bracket from the hood, position
it on the wall, and ensure it’s level.
3.) Mark the location of the mounting screws. Note that
these LOAD-BEARING screws should be connected to
a stud, framework, or 3/4” plywood - NOT to bare sheetrock.
4.) Attach the bracket to the wall.
Mounting, Part II: Blower Removal
1-2.) Remove the indicated screws & remove bottom panel.
3-4.) Remove the indicated screws & remove top panel.
5.) Disconnect the control panel cable from blower.
6.) Disconnect the power cable from the blower.
7.) Disconnect the grounding wire from the hood backplate.
8.) Remove the 6 screws holding the blower.
Blower Motor Removal
Loading ...
Loading ...
Loading ...