Loading ...
Loading ...
Loading ...
5) Screw the regulator cap back into the regulator and re-attach the regulator to the nipple and flare
union (see Figures 14 and 23).
B. CHANGE BURNER NOZZLES
INSTALLATION TIP: First remove all nozzles and then start replacing them. This will help to prevent
the possibility that some may not be replaced.
1) Remove the burner grates, burner caps and burner heads.
2) Using a 7mm nut driver, remove the burner nozzles.
IMPORTANT: Carefully read and observe each nozzle label for correct location (see Figure 18).
Figure 22
Figure 23
29
Loading ...
Loading ...
Loading ...