Loading ...
Loading ...
Loading ...
Using a PC
[] PC control of the TV
• Attach an RS-232C cable cross-type (commercially
available) to the supplied Din/D-Sub RS-232C for the
connections.
o This operation system should be used by a person who is
accustomed to using computers.
[] Communication conditions
Set the RS-232C communication settings on the PC to
match the TV's communication conditions.
The TV's communication settings are as follows:
9,600 bps
8 bits
None
1 bit
None
[] Communication procedure
[] Command format
Eight ASCII codes ÷ OR
I _-_
Command 4-digits Parameter 4-digits Return code
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0-9, x, blank, ?
[] Parameter
Input the parameter values, aligning left, and fill with
blank(s) for the remainder. (Be sure that 4 values are
input for the parameter.)
Send the control commands from the PC via the RS-
232C connector.
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time.
Wait until the PC receives the OK response before
sending the next command.
[] Command table
Commands not indicated here are
When the input parameter is not within an adjustable
range, "ERR" returns. (Refer to "Response code format".)
Any numerical value can replace the "x" on the table.
When "?" is input for some
conamands, the
present setting
value responds.
Normal response
Return code (0DH)
not guaranteed to operate.
[] Response code format
Problem response (communication
error or incorrect command)
IEImIR
Return code (0DH)
CONTROL ITEM COMMAND PARAMETER
POWER ON COMMAND SETRNG RiSiPiW oi i i Off
i i i 11 i i On
POWER SETIING PiOiWi R 0i i i P...... off
i i i _i ii, , , p.....On
INPUTSELECTIONATOGGLE I ITIGID xl i i (Toggle)
TV I iTiViD oi i i
INPUT1 8 I ;iA ;i V ;i D * i i i Input terminal numbe/(1 8)
INPUTSELECTION B INPUT 1 I i N i P i 1 * i i i 0:Auto, 1: VIDEO, 2: COMPONENT
INPUT2 I i N i P i 2 * i i i O:Auto, 2: COMPONENT. 3: S TERMINAL
AV MODE SELECTION A i ViM i D * i i i 0: _roggle)1: STANDARD, 2: MOVIE, 3: GAME, 4: USER,
i i i i i i 5: DYNAMIC (Fixed) 6: DYNAMIC, 7: PO, 100: INTELLIGENT
VOLUME V ;iO ;iL ;iM * i * i i Volume {0_60)
POSITION H-POSITION H i P i O i S * i * i * i
V POSITION V i P i o i S * i * i * i
CLOCK CiL iciK * i * i * i Only PCmode.(0 180)
PMASEPiHiSiE " i* i" i OnlyPCmode_O4D_
VIEWMODE WiliDiE *i i i O:(T°ggle)[AV]'l:SideBar[AV]'2:SStretch[AVl
i i i i i i 3: Zoom [AV}, 4: Stretch [AV], 5: Normal [PC]
i i i i i i 6: Zoom [PC], 7: Stretch [PC],
8: Dot by Dot [PC] [AV], 9: Full Screen IAV]
MUTE MiUiTiE *i i i O: {Toggle), 1: On, 2: Off
SURROUND AICISIUEE E *i i i 0: (Toggle), l: On, 2:Off
AUDIO SELECTION A i O i H i A x i i i (Toggle)
SLEEPTIMER oiFiTiM *i i i 0:Off, IOFFTIMER 30MIN,2:OFFTIMER 60MIN,
i i i i i i 3:OFFTIMER 90MIN,4:OFFTIMER 120MIN
CHANNEL DIRECT D i C i C i H * i * i * i The channel number of %/
CHANNELi i i i i i (_13._)
(ANALOG) i i i i i i
DIRECT DiAl2 iP * i * i * i * (01009999)
CHANNEL Dici2i U *i*i*i (1999)
(DIGITAL) :1 i i iii
DICI21Li i i *i*i*i (0999)
E E E E E E
D i C i 1 i 1 * i * i * i * (O 6383)
OH UP O i H i U i P x i i i The channel number of%/+1
CH DOWN ciHiDiw xi i i The channel number of %/ 1
co oiYioiP xi i i (Toggle)
CONTROL CONTENTS
The Power On command rejected.
The Power On command accepted.
It shifts to standby.
Power On
It input switches by the toggle. (It is the same as an input change key)
It input switches to TV. (A channel/÷mains as it is. (L_st memory))
It input switches to INPUT1 -INPUTS.
An input change is also included.
Although it can choose now, it is toggle operation in inside.
The screen position variable ranges depend on the View Mode or the
signal type. The ranges can be seen on the position setting screen.
0: Although it carl choose now, it is toggle operation in inside.
1: Only available when 4:3 signal is being input.
5, 6: Only available when 4:3 signal is being input.
8: [PC] Avaibble except when UXGA is being input.
[AV] Only available when 1O8OVp is being input.
9: Only available when 720p is being input.
An input change is included if it is not %/display.
In Air, 2 690h is effective.
In Cable, 1 135ch is effective.
DIGITAL Air (Two Part numbers, 2 digit plus 2 digit)
DIGITAL Cable (Two Part numbers, 3 digit plus 3 digit)
E/_}nt half of DIGITAL CABLE CHANNEL NO. (Designate maior channel)
DIGITAL Cable (Two Part numbers, 3 digit plus 3 digit)
Rear half of DIGITAL CABLE CHANNEL NO. (Designate minor channel)
DIGITAL Cable (One Part numbers, 5 digit, less than 10,000)
DIGITAL Cable (One Part numbers, 5 digit, more than 10,000)
If it is not TV display, it will input switch to TV. (same function as CHA)
If it is not TV display, it will input switch to TV. (same function as CHV)
Toggle operation d a closed caption.
If an underbar (_)appears in the parameter column, enter a space.
= If an asterisk (*)appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
= Any numerical value can replace the "x" on the table.
Q- 45
Loading ...
Loading ...
Loading ...