Loading ...
Loading ...
Loading ...
"ZERO" OR "TARE" FUNCTION
To weigh different loads consecutively without removing loads
from the scale. (Place first load on the scale, get weight reading.
Press button to reset the LCD reading to "0" before
adding next load. You can repeat this operation.)
Condition 1: "ZERO" function
When total sum of all loads on scale ≤ 4% of scale's max.
weight capacity.
4% = 20g when capacity is 500g
40g when capacity is 1kg
80g when capacity is 2kg
200g when capacity is 5kg
LCD will show "0g" each time is pressed. It means
ZERO function is activated. Max. weight capacity remains
unchanged.
Condition 2: "TARE" function
When total sum of all loads on scale > 4% of scale's max.
weight capacity.
4% = 20g when capacity is 500g
40g when capacity is 1kg
80g when capacity is 2kg
200g when capacity is 5kg
LCD will show "0g" and "T" each time is pressed. It
means TARE function is activated. Max. weight capacity is
reduced by total weight of all loads.
AUTO SHUT OFF (POWER SAVING MODE)
Auto shut-off occurs if display shows '0' or shows the same weight reading for a
couple of minutes.
Warning Indication Instructions and methods
Overload Indication
Item on scale is over the max. weight.
(Max. weight is indicated on the scale).
Please remove item to avoid damage.
Battery power is low.
Please replace new battery.
Low Battery IndicationLo
Err
INDICATION
CLEANING AND CARE
1. Clean the scale with a slightly damp cloth. DO NOT immerse the scale in water or use
chemical/abrasive cleaning agents.
2. All plastics parts should be cleaned immediately after contact with fats, spices, vinegar
and strongly colored foods. Avoid contact with acids citrus juices.
3. Always use the scale on a solid, flat surface.
4. Do not knock, impact or drop scale.
5. This product is a precision instrument, please be careful.
6. Place in a cool dry place
7. Check the battery if the scale cannot be turned on.
8. Designed for household use and non-commercial.
Under this condition: By pressing , you can see the total
weight of all loads on the scale. If you want to weigh more
loads, just press to reset LCD reading to '0' again.
5 6
Loading ...
Loading ...
Loading ...