Ancona AN1310 User Manual and Installation Instructions

Loading ...

— 13 —

STEP 10

Connect Ductwork

• Attach ductwork to damper. Secure the ductwork with duct tape to

make sure joints are secure and air- tight.

• Do not install the duct tape too tightly as this may prevent the damper

apsfromopeningwhichwilloverworkthemotorandcauseimproper

functioning of the unit.

• Fasten all connections with sheet metal screws and tape all joints with

certied aluminum or foil tape. Use caulking to seal exterior wall or roof

opening around the cap.

Figure 6

STEP 11

Connect to AC

• ConnectACplugintoagroundedACoutlethaving120V,60Hz.Placetheoutletatamaximumdistanceof33-1/2in.

(851 mm) from where the cord exits on the hood.

• SEE IMPORTANT INSTRUCTIONS ON NEXT PAGE.

3-Pronged Plug

Ground Plug

3-Prong Receptacle

Installation

Figure 5

Hardware Note: For safety reasons, please verify provided screws are compatible with cabinetry

construction and wall material, before installation. Please consult your installation specialist regarding the

optimal type of mounting screws and wall anchors to suit your home’s construction.

Loading ...

Ancona AN1310 28 Inch Stainless Steel Ducted Under Cabinet Insert