Ancona AN1310 User Manual and Installation Instructions

Loading ...

— 11 —

Installation

STEP 6

Preparations

NOTE: To avoid damage to your hood, prevent debris from entering the vent opening.

• Determine and mark the centre line on the ceiling or wall where the range hood will be installed.

• Make sure there is proper clearance within the ceiling or wall for exhaust vent.

• Duetotheweightandsizeofthisunit,pleasemakesurethatthesupportsystemorframeworkbeingusedisstableand

secure in the ceiling or wall.

• Put a thick, protective covering over counter top, cooktop or range to protect from damage or dirt.

• Removeanyhazardousobjectsaroundtheareawheninstalling.

CAUTION

If moving the cooking range is necessary to install the hood, turn OFF the power on an electric range at the main

electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.

Figure 1

STEP 7

Cabinet Preparations

• Start with the custom hood base, because its position will determine the height of the insert.

• Cut a hole in the bottom of the cabinet, using the dimensions shown on gure 1.

15 in./

38.1 cm

27.4 in. / 69.5 cm (28 in.)

33.3 in. / 84.5 cm (34 in.)

Warning: The framework must be positively secured to wall studs or other wooden framework behind the

drywall. Make sure it is capable of supporting its own weight. Failure to do so may cause personal injury or

damage to countertop or cooktop.

Loading ...

Ancona AN1310 28 Inch Stainless Steel Ducted Under Cabinet Insert