Loading ...
Loading ...
Loading ...
Reinstalling the Refrigerator Door
Left Door
1. Lower the door onto the middle hinge pin (10).
2. Fit the top hinge (7) over the hinge lever latch (8) and into
place. Rotate the lever (6) clockwise to secure the hinge.
3. install the grounding screw (5) and connect the two
wire harnesses (4).
4. Push the water tube (3) located at the top of the left
door into the hole beside the left hinge on the top of
the cabinet until it exits through the back.
5. Insert the water supply tube (3) into the connector until
you see only one scale mark. Fully insert the tube over
5/8 in. (15 mm).
6. Hook the tabs on the left side of the hinge cover (1) under the
edge of the top hinge (7) and position the cover in
place, insert and tighten the cover screw (1).
(2) (I)
(3).
(8)
/
/
I,_ Right Door
1. Lower the door onto the middle hinge pin (9).
2. Fit thetop hinge (4) over the hinge lever latch (5) and into
place. Rotate the lever (3) counterclockwise to secure
the hinge.
3. Hook the tabs on the right side of hinge cover (2) under
the edge of the top hinge (4) and position the cover in
place. Insert and tighten the cover screw (1).
_/(2)
(3)
(lO)
,CAUTION
Collet
Tube
Scale Mark
Clip --
After inserting, pull the tube to
make sure that it is secure and
reinsert the clip.
14
Loading ...
Loading ...
Loading ...