Sharp IG-GC2E-P 3.6m² Car Ion Generator

User Manual - Page 12

For IG-GC2E-P.

PDF File Manual, 40 pages, Read Online | Download pdf file

IG-GC2E-P photo
Loading ...
Loading ...
Loading ...
E-11
SPECIFICATIONS
How to replace the Plasmacluster Ion Generating Unit
1
2
3
Remove the claw
Insert to the claw.
Take the unit holder. (see E-9)
Remove the claw of unit holder and remove
the Plasmacluster Ion Generating Unit.
Please do not dispose of the unit holder.
1 Attach a new Plasmacluster Ion
Generating Unit to the unit holder.
2 Reattach the unit holder to the main unit.
3 Reattach the main unit cover and lter
cover.
Insert the car adapter in the accessory socket and check the unit replace
ment
light is turned OFF.
After replacement, you may hear the sound “Zi, Zi ...”(sound
generated by Plasmacluster Ion) become louder, however, it is simply
because the Plasmacluster Ion Generating Unit has been replaced
with a new one. It is not a failure.
Note
Model IG-GC2
Power Car Adapter
Rated input DC12V
Rated output DC5V(Max.2A for 2 ports)
Operation mode LOW MED TURBO
Power consumption 0.5W 0.7W 1.8W
Ion density
Approx. 7,000
ions/cm
3
Approx. 25,000
ions/cm
3
Approx. 75,000
ions/cm
3
Operating noise level 19dB 23dB 36dB
Outer dimensions
Upper dimension: 74mm / Lower dimension 65mm /
Height: 162mm
(Excluding accessories)
Weight Approx. 265g (Excluding accessories)
Capacity applicable for high-density
Plasmacluster 25000
󲄄1
Approx.3.6m
3 󲄄2
Ú1 It is the index of capacity that approximately 25,000 ions blown out to the air can be
measured at the point near the center of the space (0.5m height from oor) when the
air volume is "MED" by placing the unit at the place supposing a cup holder beside
the driver's seat.
Ú2 Space corresponding to a cabin measuring 1.5 (width) x 2.4 (depth) x 1.0 (height)
meters.
Ú Some speci cations may be changed for improvement purposes.
IG-GC2_EN.indd 11IG-GC2_EN.indd 11 6/13/2559 BE 6:32 PM6/13/2559 BE 6:32 PM
Loading ...
Loading ...
Loading ...