Loading ...
Loading ...
Loading ...
17ninjakitchen.com
16 ninjakitchen.com
3 Exercising care, grasp the Chopping
Blade Assembly by the top of the shaft
and place it onto the drive gear inside
the bowl. Note that the Chopping
Blade Assembly will fit loosely onto
the drive gear.
4 Add ingredients to the bowl, making
sure not to exceed the MAX FILL line.
5 Place lid on the bowl, with black line on
tab aligned slightly to the right of tab
on front of bowl. Turn lid clockwise to
lock in place. When properly locked,
the white line on lid will line up with
the black line on bowl. Once the lid is
locked in place, press the Power button
to turn unit on. The available program
buttons will illuminate and the unit will
be ready for use.
17ninjakitchen.com
ENGLISH
IMPORTANT: As a safety feature, if the
blade assembly is not fully seated, you
will not be able to install and lock the lid.
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
NOTE: DO NOT add ingredeints before
completing installation of the blade
assembly.
NOTE: Please follow the same instructions
to install the Dough Blade Assembly.
NOTE: Auto-iQ® programs have pauses
and changes in speed throughout
the cycle.
USING THE PRECISION PROCESSOR® BOWL
1 Plug in motor base and place on a
clean, dry, level surface such as a
countertop or table.
2 Lower the Precision Processor Bowl
onto the motor base and rotate
clockwise until it clicks into place.
6a If using an Auto-iQ® program, first select
the program that best suits your recipe.
The preset feature will automatically
stop the unit at the end of the program.
To stop the unit at any time, press the
currently active program again.
6b If using a manual program, select your
desired speed. Once the ingredients
have reached your desired consistency,
press the active button again, and wait
for the unit to come to a complete stop.
7 To remove the bowl from the motor
base, turn the bowl counterclockwise
and then lift up.
8
Remove the lid by pressing the
RELEASE button on the front tab and
then lifting up on the handle. Always
remove the Chopping Blade Assembly
before emptying the ingredients from
the bowl. To remove the Chopping Blade
Assembly, carefully grasp it by the top
of the shaft and lift it out of the bowl.
9 Turn the unit o by pressing the Power
button. Unplug the unit when finished.
Refer to the Care & Maintenance section
for cleaning and storage instructions.
Loading ...
Loading ...
Loading ...