Loading ...
Loading ...
Loading ...
en-US
176
Connecting the wall bracket
(Figs. 21 + 22)
Slide the wall bracket down into the
mounting plate from above until it au-
dibly clicks into place (Fig. 21).
Slide the PowerUnit of the fully as-
sembled vacuum cleaner, with the
battery inserted, down into the wall
bracket from above (Fig. 22).
Plug the charger into the power
socket.
The charging process will start.
Battery charging state indicator
(while charging) (Fig. 23)
The battery charging state is displayed
on the PowerUnit.
Battery life Indicator
Approx. 0–34% Bottom light
flashes slowly
Approx. 35–69% Bottom light is lit
up; middle light
flashes slowly
Approx. 70–90% Bottom and middle
lights are lit up; top
light flashes slowly
Approx. 91–99%
100%
Bottom, middle,
and top lights are
lit up
Switches off
Once the battery is fully charged, the
battery charging state indicator
switches off to conserve energy.
If the battery has not been used for a
long time and has run down, it will go
into safe mode. As a result, the battery
charging state indicator will only re-
spond after approximately 30–60min-
utes when charging in the PowerUnit.
Battery charging state indicator
(while in use) (Fig. 23)
The battery charging state is displayed
on the PowerUnit.
Battery life Indicator
Approx. 100–70% Top, middle, and
bottom lights are
lit up
Approx. 69–35% Middle and bot-
tom lights are lit
up
Approx. 34–15% Bottom light is lit
up
Approx. 14–0% Bottom light
flashes slowly
We recommend allowing the battery to
run down completely before recharging
it. In this way, you will benefit from the
battery’s full capacity.
Loading ...
Loading ...
Loading ...