Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE
ice-making cycle; alternatively, the user can remove the ice
basket and refill the water reservoir with water to “MAX” mark
manually, and then the appliance will restart the ice-making
cycle automatically. Please remember to close the front lid after
refilling water manually to avoid overflow.
(2)If the appliance is not connected with external water source,
firstly remove the ice basket and then fill the water reservoir with
water manually. After the water reservoir is refilled with water,
please close the front lid, then the appliance will restart the
ice-making cycle automatically.
11.When you have got your desired amount of ice, stop the
ice-making cycle by pressing the “ON/OFF” key and unplug the
unit from the wall outlet.
12.Open the front lid and transfer the ice to a freezer.
13.Allow the ice maker to reach room temperature.
14.Suggest replacing the water every a week. Please empty the
water reservoir if the ice maker is not used for a long time.
15.The ice maker can be connected with external water source
by the 1/4PE tube shown in the section of “CLEANING AND
MAINTENANCE” (see Fig.1) if you want to add the function of
refilling water automatically.
To keep your ice tasting fresh and your ice maker looking great,
we recommend cleaning your ice maker at least once per week.
1.Remove the ice basket, add water and detergent into the
water reservoir, then hold and press “Clean” key for about 3
seconds, the “ ” indicator lights up and the appliance enters
into the cleaning mode.
2.After cleaning for 8 minutes, the appliance stops working and
the “ ” indicator flashes.
3.Remove the drain tube at the back of the appliance and place
it at the dirty water outlet. Open the drain plug, and then the
dirty water is drained from the drain tube until all the water
inside the appliance is drained out.
08
Loading ...
Loading ...
Loading ...