Loading ...
Loading ...
Loading ...
USING YOUR ICE MAKER
07
1.Ensure that the drain plug at the back of ice maker is closed
well.
2.Plug the ice maker into the wall outlet, the “ ” indicator
flashes.
NOTE: Please make the ice maker rest for 30 minutes before
plugging in if it has been moved.
3.Open the front lid and remove the ice basket.
4.Fill the water reservoir with drinking water.
NOTE: Do not fill above the MAX water level mark.
5.Replace the ice basket and close the front lid.
6.Press the “ON/OFF” key and the “ ” indicator lights solidly.
7.The ice-making cycle will last approximately 20-30 minutes,
depending on the ambient temperature and water temperature.
8.The ice-making assembly is equipped inside of appliance, and
the ice-making assembly will keep producing ice when the water
is pumped into it. When the ice forms in the ice-making
assembly, the ice cubes will be transferred into the ice tray and
then the ice cubes will drop into the ice basket. And the above
action will be repeated until the ice basket is full.
9.The “ ” indicator will light up when the ice basket is full and
then the ice maker will stop the ice-making cycle automatically.
Open the front lid and gently remove the ice from the ice basket
with the ice scoop. And then replace the ice basket and close
the front lid, then the ice maker will restart its ice-making
function automatically. If the ice is not removed, after about 8
hours, the appliance will automatically work again, alternatively,
you can press “ON/OFF” key to restart the appliance.
10.The “ ” indicator will flash when the water reservoir is lack
of water.
(1)If the appliance is connected with external water source by
the 1/4PE tube shown in the section of “CLEANING AND
MAINTENANCE” (see Fig.1), the water reservoir will be refilled
with water automatically and the appliance will restart the
Loading ...
Loading ...
Loading ...