Loading ...
Loading ...
Loading ...
9OPERATING INSTRUCTIONS
PRESS TO LOWER
PRESS TO RAISE
DO THIS:
NOTE
The following instructions represent the
touch pad. The same instructions can be
used for the remote control.
TO TURN UNIT ON:
PRESS ON/OFF BUTTON
DO THIS:
YOU WILL SEE:
NOTE: NOTE: The unit will run in energy
saver(econ) mode when powered on each
time, if last shutdown is in cool or energy
saver(econ) mode.
In this mode, the fan will
continue to run for 3 minutes after the
compressor shuts off. The fan then cycles on
for 90 seconds at 10 minute intervals until
the room temperature is above the set
temperature, at which time the compressor
turns back on.
TO CHANGE TEMPERATURE SETTlNG:
Note: Tap or hold either up ( ) or down ( )
button until the desired temperature is seen
on the display. This temperature will be
automatically maintained anywhere between
60 °F (16 °C) and 90 °F (32 °C). If you want
the display to read the actual room
temperature. See "To Operate on Fan Only"
section.
TO ADJUST FAN SPEEDS:
YOU WILL SEE:
PRESS TO SELECT
DO THIS:
YOU WILL SEE:
Loading ...
Loading ...
Loading ...