Loading ...
Loading ...
Loading ...
12 OPERATING INSTRUCTIONS
PRESS FILTER
RESET BUTTON
DO THIS:
TO CHANGE TEMPERATURE DISPLAY:
DO THIS:
PRESS AND HOLD THE UP/DOWN
BUTTONS SIMULTANEOUSLY
FOR 3 SECONDS
YOU WILL SEE:
Note: The control is capable of displaying
temperature in degrees Fahrenheit or
degrees Celsius.
DO THIS:
PRESS
ON/OFF BUTTON
TO TURN UNIT OFF:
YOU WILL SEE:
Note: If the unit is turned off in heat mode (if
applicable) or fan only mode, it will return to
the same setting when it is turned on again.
When the unit is turned off in cool or energy
saver mode, it will run in energy saver mode
when it is turned on again, but the setting of
temperature and fan speed will remain.
If the display reads ”AS” or ”ES” a sensor
has failed. Contact your Authorized
Frigidaire Service Center.
FAULT CODES:
Now that you have mastered the operating
procedure, here are more features in your
control that you should become familiar
with.
ADDITIONAL THINGS YOU SHOULD KNOW
NOTE
The "Cool" circuit has an automatic 3
minute time delayed start if the unit is
turned off and on quickly. This prevents
overheating of the compressor and possible
circuit breaker tripping. The fan will
continue to run during this time.
Loading ...
Loading ...
Loading ...