Tripp Lite BP96V NEW Eaton Tripp Lite SmartOnline Series Tower UPS Advanced User Guide

Loading ...

Tripp Lite by Eaton SmartOnline Series User Guide 614-21326—Rev 01 27

1. From the “UPS Home Menu“ press the button to enter into the “Main Menu Screen”.

2. In the “Main Menu Screen” press the

or button until the “IN / OUT SETTINGS” menu is displayed.

3. Press the

button. Use the or arrow buttons to display “HIGH EFFIC. MODE”.

4. Press the

button and change the setting to “ENABLED”.

5. The UPS transfers to High Efficiency mode after 5 minutes.

55..77 CCoonnffiigguurriinngg tthhee BBaatttteerryy SSeettttiinnggss

Low battery warning

During discharge, the low battery alarm is activated if the remaining runtime goes below 3 minutes or less than

the setting capacity threshold (0 % by default). This threshold can be modified.

Restart battery level

This setting is used to define the battery restart level. The battery level must reach this threshold (0 % by

default) to enable UPS start.

See the

4.5 User Settings section to modify these settings.

55..88 RReettrriieevviinngg tthhee EEvveenntt LLoogg

To retrieve the Event log through the display:

1. From the “

4.3 UPS Home Menu“ press the

button to enter into the “4.5 User Settings”.

2. In the “

4.5 User Settings” press the

or button until the “Event Log” menu is displayed.

3. Press the

button. Use the or arrow buttons to display the events.

The log retains 50 events with the most recent event listed as the first event. Press the ESC button twice to

exit back to the “

4.3 UPS Home Menu” menu .

Configuring the Battery Settings

Loading ...

Tripp Lite BP96V NEW series 96V Extended Battery Module EBM