Loading ...
Loading ...
Loading ...
7
ENG
MOUNTING AND INSTALLATION OF THE
EXTRACTION HOOD
There are 2 eyelet marks on the back part of your hood for hanging the hood.
1. Determine the place of the hood which has to be hanged on a plane surface and at a height of 65 cm from
the oven and mark the hanging hole places.
2. Use a 08 mm drill for drilling and drive the screws by placing dowels.
3. Hang the hood by using the hanging screws and fix it.
4. There are 2 flues in the parcel of the hood. The short flue is used for selling the height and the short flue will
be placed in the long flue.
5. Place both flues on the hood at the same time. Make the flue height adjustment by sliding the short height
adjustment flue from inside upwards.
Drill the 2 eyelet marks on the back part of the hood and hang the hood on the wall by placing dowels and the
screws. Place the long flue on the hood by sliding it down in the short flue. In this may assembly of the hood will
be completed.
11. Ventilation of the room should be sufficient if you are operating your aspirator with products using gas or
similar fuel at the same time.
12. Ensure that the children and people with physical and mental disabilities do not use the appliance.
Loading ...
Loading ...
Loading ...