Loading ...
Loading ...
Loading ...
5
ENG
REPLACING THE ACTIVE CARBON FILTER
(Circulating air mode only)
WHAT TO DO BEFORE INSTALLATION AND
USAGE
To maintain odor insulation levels, regular care of the filter is necessary. The active carbon filter should be
replaced every 4 months.
INFORMATION
• Active carbon filters are not included in the delivery. Active carbon filters may be purchased from your dealer,
customer services or a store online.
• Active carbon filters cannot be cleaned and reused.
1. Remove the metal grease filter.
2. Turn the old active carbon filter and pull it from its slot.
3. Place a new active carbon filter in the slot, press it down and turn it.
4. Reinstall the metal grease filter.
Dear User
Our aim in presenting you this manual is to ensure that you can use our aspirators, produced with the state of
the art technology within our modern facilities and supplied to the market subsequent to strict quality controls,
in the most efficient way.
We recommend your esteemed side read carefully this manual and keep it handy to use it again if required prior
to providing information of usage.
1. Do not connect the exit of your aspirator to flues where devices like stoves or water heaters are connected
and where there is circulation of hot gases.
2. The distance between the bottom surface of your aspirator and the upper surface of electric ovens should
be 65 cm stove while the distance should be 75 cm stove between the bottom surface of your aspirator
and the upper surface of ovens using gas or mixed fuels . Otherwise, the product will be definitely out of
warranty!
3. Insert the plug of your aspirator to the socket when all the usage switches on the control panel are in closed
position.
4. Installation and wiring should be carried out through our authorized services. Our company is not
responsible from failures arising due to installation by third parties.
5. Be careful that the power cord is not compressed and crushed during installation. A hole through which
the plug of the aspirator can pass easily must be opened without cutting the aspirator cord and installation
must be carried out in this way. If the power cord is damaged it must be replaced through our authorized
services.
Loading ...
Loading ...
Loading ...