Loading ...
Loading ...
Loading ...
7
Identify the Vent In and Out Openings on the Blower Unit
• The Blower Unit has Vent In and Vent Out on 2 opposite sides. One side with just a Vent In and the other side with a
Black Speed Control Box and a Vent Out.
INSTALLATION
Connection
Box
Vent out to
the Roof
Vent in from the
Hood Unit
Vent in from the
Hood Unit
Vent out to
the Roof
Blower Unit Installed Vertically Blower Unit Installed Horizontally
Installing the Range Hood
• For installing under the cabinet with recessed
bottom, attach a 4" wide wood filler strip (not
provided) on each side.
• Use a stub finder to locate and mark 2 studs inside
the wall.
• Make 2 cutouts on the top and bottom of the
cabinet that align with the outlet of the top vent
on the hood. The diameter of the cutout should be
slightly larger than the diameter of the duct.
The following steps require 2 or more people:
• Draw the power cord through the bottom
cutout and align the range hood beneath the
cabinet so that the exhaust on the hood and
the cutout are in line.
• Raise and screw the top of the hood to the
bottom of the cabinet through the knockout
holes shown below:
• Tighten all screws until the range hood is
securely mounted to the bottom of the cabinet.
Make sure the range hood is securely mounted
before releasing.
• For a more secure installation, install additional
screws into the pre-drilled holes on the
backplate of the range hood to secure it to the
Attach wood ller strips
* For Models with Round Adaptor Only
* For Models with Rectangular Adaptor Only
Loading ...
Loading ...
Loading ...