Loading ...
Loading ...
Loading ...
Troubleshooting
123
8
My machine is
connected but it does
not feed my document
or do anything else.
Your document is placed incorrectly. Insert your document until you feel the top edge of
the document touch the inside of your machine.
Your document is too thin or too thick. Check that your document is acceptable
(see Document Information on page 5).
If your document is acceptable:
1. Confirm that the USB cable connecting your
machine to your computer is connected correctly.
2. Reinstall the scanner driver from the Brother
installation DVD.
Paper dust has accumulated on the
surface of the rollers.
Clean the rollers.
See Clean the inside of your machine on page 98.
Too many documents are loaded in the
ADF at a time.
Make sure your document is acceptable for the
machine. See Document Information on page 5.
There are foreign objects in the ADF. Remove any foreign objects or ripped paper from
the ADF.
A multifeed occurs. Paper dust has accumulated on the
surface of the rollers.
Clean the rollers.
See Clean the inside of your machine on page 98.
Too many documents are loaded in the
ADF at a time.
Load no more than 100 pages at a time.
See Document Information on page 5.
The document is sticky or has a sticky
note on it, which caused a multi-feed.
Use the Carrier Sheet to scan the multifed
document.
The document is
jammed.
Causes may vary. Open the machine’s top cover and gently pull out
the document. Make sure no paper remains in the
machine.
Your document is not acceptable for the
machine (for example, if the paper is
too long).
Make sure your document is suitable for the
machine (see Document Information on page 5).
Use the Carrier Sheet (see Loading documents
using the Carrier Sheet in the ADF on page 16).
Paper dust has accumulated on the
surface of the rollers.
Clean the rollers. See Clean the inside of your
machine on page 98.
There are foreign objects in the ADF. Remove any foreign objects or ripped paper from
the ADF.
My machine gets
warm.
It is normal for your machine to emit a
small amount of heat after prolonged
use.
If there is a strange smell coming from the machine
or the machine feels hot to the touch, immediately
remove the power cord and USB cable from your
machine. Contact Brother customer service or your
local Brother dealer. See For customer service on
page 133.
The scan quality is
poor.
Paper dust has accumulated inside
your machine.
Clean your machine (see Maintenance on page 96).
The machine resolution is too low. Increase the machine resolution.
For Windows
®
: see Image tab on page 31.
For Macintosh: see Image tab on page 69.
Difficulty Cause Suggestions
Loading ...
Loading ...
Loading ...