Loading ...
Loading ...
Loading ...
EN / 38
It gives out an audio warning if
change is not allowed.
The loading door will not open if the
water temperature in the machine
is high or the water level is above
the loading door baseline.
6.17 Cancelling the Programme
When the machine is turn on and off the
programme gets cancelled. Press and hold
On/Off button for 3 seconds.
If you turn the programme selection
button when the Child Lock is en-
abled, the programme will not be
cancelled. You should cancel the
Child Lock first.
If you want to open the loading
door after you have cancelled the
programme but it is not possible to
open the loading door since the wa-
ter level in the machine is above the
loading door baseline, then turn the
Programme Selection knob to
Pump+Spin programme and drain
the water in the machine.
6.18 End of Programme
End warning appears on the display when
the programme is completed.
The product automatically shuts down if no
buttons are pressed for 10 minutes. Display
and all indicators are turned off.
Completed programme steps will be dis-
played if you press the On/Off button.
7 Maintenance and Cleaning
Please read the “Safety Instruc-
tions” section first!
Service life of your product extends and fre-
quently experienced problems will be re-
duced if it is cleaned at regular intervals.
7.1 Cleaning the Detergent Drawer
Clean the detergent drawer at regular inter-
vals (once every 4 to 5 wash) as mentioned
below to prevent accumulation of powder
detergent.
Clean the syphon if excess amounts of wa-
ter and fabric softener mixture remains in
the softener compartment.
1. Press the marked part of the syphon
within the softener compartment and
then pull the drawer towards yourself to
take it out.
2. Lift and remove the syphon from behind
as shown.
3. Rinse drawer and syphon in the sink
with plenty of warm water. Use gloves
or suitable brush to prevent contact of
residues in the drawer with your skin.
4. Firmly fit the syphon and the drawer
back after cleaning.
Loading ...
Loading ...
Loading ...