Loading ...
Loading ...
Loading ...
7
5. Installation
1
5.1 Power Requirements
The charging station must be plugged into an AC outlet with a dedicated
circuit. An AC outlet with a 20-amp (NEMA 5-20R) AC circuit is
recommended for powering the charging station. The AC outlet used to
power the charging station should not be shared. The total wattage of
the charging station and all connected components should not exceed
1440 watts. The AC power distribution unit is protected by a 15-amp input
breaker
A
.
5.2 Mounting the Charging Station Tower
Warning: Do not attempt to mount the charging station tower to the wall with any electronic devices inside
the charging tower’s device trays.
A
A
A
1
Pull the input cord through one of the two cable access hole grommets
located at the bottom of the charging station tower
A
.
2
With the help of an assistant, lift the charging station tower and align
its keyhole slots with the mounting hardware (installed in step 3 of the
4.2 Preparation section). Then, push in the charging station tower so
it is flush against the wall and carefully lower the charging station tower
to the ground
B
.
OR
2
B
Loading ...
Loading ...
Loading ...