Loading ...
Loading ...
Loading ...
WWW.SENIXTOOLS.COM 5
GENERAL SERVICE
Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains
carbon monoxide, an odorless and deadly gas.
• Before cleaning, repairing, or inspecting, make certain the blade and all moving
parts have stopped. Disconnect the spark plug wire and ground against the
engine to prevent unintended starting.
• Check the blade and engine mounting bolts at frequent intervals for proper
tightness. Also, visually inspect blade for damage (e.g., bent, cracked, worn).
• Replace blade with the original equipment manufacture’s (O.E.M.) blade only,
listed in the Parts pages of this manual. Use of parts which do not meet the
original equipment specications may lead to improper performance and
compromise safety!
• Mower blades are sharp and can cut. Wrap the blade or wear gloves, and use
extra caution when servicing them.
• Keep all nuts, bolts, and screws tight to be sure the equipment is in safe
working condition.
• Never tamper with safety devices. Check their proper operation regularly.
• After striking a foreign object, stop the engine, disconnect the spark plug wire
and ground against the engine. Thoroughly inspect the mower for any damage.
Repair the damage before starting and operating the mower.
• Never attempt to make a wheel or cutting height adjustment while the engine
is running.
• Discharge cover, and trail shield are subject to wear and damage which could
expose moving parts or allow objects to be thrown. For safety protection,
frequently check components and replace immediately with original
equipment manufacturer’s (O.E.M.) parts only, listed in the Parts pages of this
manual. Use of parts which do not meet the original equipment specications
may lead to improper performance and compromise safety!
• Do not change the engine’s governor setting or over-speed the engine. The
governor controls the maximum safe operating speed of the engine.
• Check fuel line, tank, cap, and ttings frequently for cracks or leaks. Replace if
necessary.
• Do not crank engine with spark plug removed.
• Maintain or replace safety and instruction labels, as necessary.
• Observe proper disposal laws and regulations. Improper disposal of uids and
materials can harm the environment.
• According to the Consumer Products Safety Commission (CPSC) and the U.S.
Environmental Protection Agency (EPA), this product has an Average Useful Life
of seven (7) years, or 140 hours of operation. At the end of the Average Useful
Life have the machine inspected annually to ensure that all mechanical and
safety systems are working properly and not worn excessively. Failure to do so
can result in accidents, injuries or death.
DO NOT MODIFY ENGINE
To avoid serious injury or death, do not modify engine in any way. Tampering with
the governor setting can lead to a runaway engine and cause it to operate at unsafe
speeds. Never tamper with factory setting of engine governor.
SAFETY INSTRUCTIONS
Loading ...
Loading ...
Loading ...