Loading ...
Loading ...
Loading ...
WWW.SENIXTOOLS.COM12
SERVICE AND MAINTENANCE
WARNING
Before performing any type of maintenance/service, disengage all controls
and stop the engine. Wait until all moving parts have come to a complete
stop. Disconnect spark plug wire and ground it against the engine to prevent
unintended starting.
Interval Item Service Service Log
Each use 1. Engine oil level
2. Loose or missing hardware
3. Unit and engine
1. Check
2. Tighten or replace
3. Clean
1st 5 hours 1. Engine oil 1. Change
Annually or 25 hours 1. Spark Plug
2. Control linkages/pivots and wheels
3. Underside of mower deck
2
1. Check
2. Lube with light oil
3. Clean
Annually or 50 hours 1. Air lter & Pre-Cleaner(If Equipped)
1
2. Engine Oil
1. Clean
2. Change
Annually or 200 hours 1. Air lter & Pre-Cleaner
1
1. Change
Annually 1. Spark plug 1. Replace
Before Storage 1. Fuel system 1. Run engine until it stops from lack of fuel, or add stabilizer to a
full tank of fresh fuel prior to storage.
1
Clean more often under dusty conditions or when airborne debris is present.
2
Check and clean more often if mower is typically used in the mulching conguration.
WARNING
Always stop engine, disconnect spark plug wire, and ground against engine before
performing any type of maintenance on your machine.
GENERAL RECOMMENDATIONS
• Always observe safety rules when performing any maintenance.
• The warranty on this lawn mower does not cover items that have been
subjected to operator abuse or negligence. To receive full value from warranty,
operator must maintain the equipment as instructed here.
• Changing of engine-governed speed will void engine warranty.
• All adjustments should be checked at least once each season.
• Periodically check all fasteners and make sure these are tight.
•
•
Follow the maintenance schedule given below. This chart describes service
guidelines only. Use the Service Log column to keep track of completed
maintenance tasks. See the Engine Operator’s Manual for fuel, oil, air lter and
spark plug instructions.
CLEAN ENGINE
• Daily or before every use, clean grass, cha or accumulated debris from engine.
Keep linkage, spring, and controls clean. Keep area around and behind muer
free of any combustible debris.
• Keeping engine clean allows air movement around engine.
• Engine parts should be kept clean to reduce the risk of overheating and ignition
of accumulated debris.
CAUTION
Do not use water to clean engine parts. Water could contaminate fuel system. Use
a brush or dry cloth.
Loading ...
Loading ...
Loading ...