Casio ECB-S100D

User Manual - Page 18

For ECB-S100D.

PDF File Manual, 29 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Alarm
The watch will beep when an alarm time is
reached. You can set up to five different
alarms. The hourly time signal causes the
watch to beep every hour on the hour.
The alarm sound is muted in the cases
described below.
ー 
When battery power is low
ー 
When watch is at Level 2 power saving
l
Power Saving Function
Using EDIFICE Connected to
Configure Alarm Settings
If the watch is paired with a phone, you can
also use EDIFICE Connected to set alarms.
l
Configuring Watch Settings
Configuring Alarm Settings
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Press (D) to scroll through alarm numbers
([AL1] to [AL5]) until the alarm you want to
configure is displayed.
Alarm number
Alarm time
3. Hold down (A) for at least two seconds.
Release the button when the hours digits
start to flash.
This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.
Alarm hour
4. Use (B) and (D) to change the hour setting.
If you are using 12-hour timekeeping,
[P] indicates p.m.
5. Press (C).
This causes the minutes digits to flash.
Alarm minute
6. Use (B) and (D) to set the minute setting.
7. Press (A) to exit the setting screen.
(Alarm) is shown on the display
while an alarm is turned on.
8. Hold down (C) for at least one second to
return to the Timekeeping Mode.
To stop the alarm
Pressing any button while the beeper is
sounding stops it.
Note
A beeper sounds for 10 seconds when
an alarm time is reached.
The watch will automatically return
from the Alarm Mode to the
Timekeeping Mode if you do not
perform any operation for about two or
three minutes.
Enabling the Hourly Time
Signal
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Press (D) to display the hourly time signal
screen ([SIG]).
3. Press (A) to toggle the hourly time signal
between enabled and disabled.
(hourly time signal) is shown on the
display while the hourly time signal is
enabled.
4. Hold down (C) for at least one second to
return to the Timekeeping Mode.
Watch Operation Guide 5658
18
Loading ...
Loading ...
Loading ...