Loading ...
Loading ...
Loading ...
ROUGH=INDiMENSiONS
< 267/8'-------)
_d4 (68.3 cm)
3/8"
.2cm)
[_ ELECTRIC CONNECTION
REAR ViEW
13 112"
29/16'---_
(6.Scm)
3314"
(9. 5 cm)
3/8" (0.96 cm) DIA. GAS
m
43 5/8'
(110.7 cm)
1"(2.54crn)
<
DOOR OPEN 90°
47 1/2"
(120.7 cm)
SiDE ViEW
43/8"
(11.1cm)
OPTIONAL --_
VENTKNOCKOUT;---,_,
<27'
(68.6cm)
36"
UNPACKING
1. Using the four shipping carton corner posts (two on each
side), carefully lay the dryer on its left side and remove foam
shipping base.
To prevent damage, do
not use the control panel or coin meter
housing as a means to pick up or move
the dryer.
NOTE: On under counter model clothes dryers, the top panel
may be removed for installation.
2.Return the dryer to
an upright position.
REVERSING DOOR SWING
FOAM
SHIPPING
_, PAD
Your dryer isdesigned so the door swing may be reversedat any
time without additional parts. Conversion is accomplished by
transferring hinges to the opposite side of the cabinet.
To change the direction of the door opening:
I. Open the dryer door. Remove the four hinge hole plugs from
the left side of the door opening. Place nearby for future
installation.
NOTE: You may need a plastic knife to help pull out the plugs.
Be careful not to scratch the paint.
2. Removethe four screws that secure the door hinges to the
dryer front panel (see below). NOTE: Remove one screw from
each of the two hinges first. Hold the door firmly before
removing the last two screws.
3. Rotate the door 180° and reinstall the door hinges to the
dryer front panel with the four screws.
4. Installthe four
hinge hole plugs in ..........
the open screw
holes on the right
side of the door
opening.
REMOVE 4 SCREWS
(ONE FROM EACH
HINGE FIRST)
5
Loading ...
Loading ...
Loading ...