Loading ...
Loading ...
Loading ...
USE THE AIR CONDITIONER
Freezing Conditions: This air conditioner is not designed for freezing outdoor conditions. It must not be
used in freezing outdoor conditions.
Remote Control: To ensure proper operation when using the remote control, aim the remote directly at
the signal receiver on the air conditioner.
• The remote control has a signal range up to 20 feet.
• Make sure nothing is blocking the remote control signal from being received by the air conditioner.
• Make sure the batteries are installed correctly and still have power.
Cooling & Heating Mode: Use the Cool or Heat mode at High, Low, Quiet fan speed when needed. Use the
temperature ▲ or ▼ buttons to set the desired temperature between 62°F-86°F.
Once the temperature is set, the compressor will cycle on and off to keep the room temperature at the set tem-
perature level. The lower the set thermostat temperature, the cooler the room will be. The higher the set ther-
mostat temperature, the warmer the room will become.
Energy Saver Mode:
When the Energy Saver mode is ON, the fan will cycle on and off with the compressor. This results in more
variations of room temperature and humidity. Normally, it is used when the room is unoccupied. The fan
may continue to run for a short time after the compressor cycles off.
When the Energy Saver mode is OFF, the fan runs all the time in fan, cool and heat mode.
*Energy Saver mode is the default startup mode
Fan Only Mode: Use Fan Only mode at High, Low, or Quiet fan speed to provide air circulation and fil-
tering without cooling. Since Fan Only setting does not provide cool, a set temperature cannot be entered.
The room temperature will appear in the display.
Loss of Power Protection: If power to the air conditioner is lost or interrupted, the air conditioner will
automatically restart in the setting last used prior to power loss. Timer will be cancelled when power is
lost or interrupted. You may need to set a new timer if desired.
Auto Mode: The air conditioner will automatically choose Cool, Fan and Heat mode based on current
room temperature.
Air Direction: Use the lever on the front air vents to adjust the airflow direction. You can direct the air-
flow to left, right, up or down.
Vertical Wheel
Air Deflector Air Deflector
Loading ...
Loading ...
Loading ...