Loading ...
Loading ...
Loading ...
.
OPERATION INSTRUCTIONS
1. ON/OFF - Press the POWER button to turn the A/C on or off. When the unit is turned off, the Timer function
will be cancelled. The set temperature will be saved.
2. MODE SELECTION - Press the MODE button repeatedly to cycle between the different modes: Cool, Dry
(Dehumidifier), Fan and Heat.
3. TEMPERATURE SETTING - Press the ▼ button to decrease the temperature when the unit is on. Stop
pressing the button when the desired temperature is displayed. Temperature range is 62⁰F-86⁰F. Press the ▲
button to increase the temperature when the unit is on. Stop pressing the button when the desired temperature
is displayed. Temperature range is 62⁰F-86⁰F. While the unit is on, press the ▲ and ▼ buttons simultaneously
to switch between Celsius and Fahrenheit.
4. FAN - Press the MODE button to turn on the fan mode.
FAN HIGH –Press this button to set the fan speed to high. Can be used in COOL, FAN and HEAT mode.
FAN LOW –Press this button to set the fan speed to medium. Can be used in COOL, FAN and HEAT mode.
QUIET—Press this button to set the fan speed to quiet. Can be used in COOL, FAN and HEAT mode.
5. SLEEP MODE - Press the SLEEP button on the remote control, When in SLEEP mode, the fan will run on qui-
et to keep fan noise at a minimum. The temperature setting will gradually increase to 1°F above the original set
temperature for each of first 2 hours when cooling. The temperature setting will gradually decrease to 1°F be-
low the original set temperature for each of first 2 hours when heating. The unit will keep operating the same
temperature until the sleep mode is turned off. Once the SLEEP mode is set, the display of the control panel
will automatically dim after 10 seconds.
6. ENERGY SAVER MODE- Press the ENERGY SAVER mode button to turn on ENERGY SAVER mode.
When the unit is in ENERGY SAVER mode, the ENERGY SAVER light will turn on. Set the unit to the de-
sired temperature for the room. Selecting ENERGY SAVER mode will cycle the fan off and on with the com-
pressor to limit energy consumption and maintain the desired temperature. Use this feature when the room is
unoccupied and a greater range of room temperature is acceptable.
*Energy Saver mode is the default startup mode
7. AUTO MODE- Press the AUTO button to activate auto mode. When the unit is in AUTO mode, the unit will
automatically choose the fan speed and cycle between COOL, FAN and HEAT modes to maintain the room
temperature. Auto Mode will operate the unit in COOL mode when the temperature is above 72 degrees, FAN
mode when the temperature is between 68-72 degrees, HEAT model when the temperature is below 68 degrees.
8. TIMER - Press the TIMER button when the unit is off to set up the Auto-on timer. The hour indicator on the
digital display will start flashing. Press the ▲ and ▼ button to set timer within 1-24 hours.
Press the TIMER button when the unit is on to set up the Auto-off timer. The hour indicator on the digital dis-
play will start flashing. Press the ▲ and ▼ button to set timer within 1-24 hours. To cancel the timer, press the
TIMER button again.
9. MY TEMP MODE - Press the MYTEMP MODE button to change the thermostat sensor from the air condi-
tioner to the remote location. When MYTEMP MODE is activated, double hyphen sign "--" will flash 3 sec-
onds on digital display. The air conditioner will cool the area depending on the location and set temperature of
the remote control. Take the remote control with you so the air conditioner cools the room to your location.
10. CHILD LOCK– Press this button 3 seconds to lock/unlock the remote control buttons.
Loading ...
Loading ...
Loading ...