Loading ...
Loading ...
Loading ...
5 | Page
Connecting to your
EYEPIECE in the field
To make connecting your phone
and adapter to your EYEPIECE as
quick as possible it is
recommended that the phone
and adapter be carried coupled
together. When ready to
capture an image or video hold
the adapter in your right hand, with fingers covering the “novagrade®” logos. Use your left hand to
rotate the COLLAR approximately 180 degrees until it the adapter is firmly clamped on the EYEPIECE.
Aligning the image
STEP 1: Select an object that will be used to view
during camera final alignment and testing such as a
tree outside your window. Look through the optics
and adjust the focus.
STEP 2: Place the adapter (with phone attached) onto
the EYEPIECE and tighten COLLAR. Turn on camera
and point at test object. (Make sure the adapter is
fully seated onto the EYEPIECE to ensure the camera
lens is parallel to the EYEPIECE)
STEP3: If the phone camera is properly positioned you
should observe a circular image centered on the
screen. If the image is not centered you may need to
LOOSEN the ALIGNMENT KNOB and make a slight
adjustment. Retighten and check the image again.
Figure 11 Test that image is centered
Figure 10 Phone sitting flat on ADAPTER
Loading ...
Loading ...