Loading ...
2 | Page
STEP 4: Remove the COMPRESSION RING and
insert the next larger size into the COLLAR,
thicker side into COLLAR first. See Figure 3.
STEP 5: Screw the COLLAR back on the adapter
with just one or two rotations.
STEP 6: Attempt to slip the adapter back onto the
EYEPIECE. If it fits easily go to STEP 7; if not repeat
STEPS 3- 6 until the correct COMPRESSION RING is
identified.
STEP 7: Once adapter is fully seated on the
EYEPIECE
1
tighten COLLAR until the COMPRESSION
RING grasps the EYEPIECE firmly.
1
The ADAPTER requires a minimum of 22mm (7/8”) engagement with the EYEPIECE. It may be necessary to
unscrew the EYEPIECE eyecup to provide the necessary engagement length.
Figure 5 ADAPTER securely installed on EYEPIECE
Figure 3 Small diameter COMPRESSION RING in COLLAR
Figure 4 Installing large diameter COMPRESSION
RING
Loading ...
Loading ...
Loading ...