Tripp Lite SMART2200RM2UL SmartPro 120V 2.2kVA 1.92kW Line-Interactive Sine Wave UPS, Lithium Iron Phosphate LiFePO4 Batteries, 2U, LCD, USB, DB9

Owner's Manual - Page 15

For SMART2200RM2UL. Series: AG-0163
Also, The document are for others Tripp Lite models: SMART1500RM2UL

PDF File Manual, 60 pages, Read Online | Download pdf file

SMART2200RM2UL photo
Loading ...
Loading ...
Loading ...
15
15A 120V
NEMA 5-15R
20A 120V
NEMA 5-20R
Basic Operation
Other UPS Features (Rear Panel)
AC Outlets: The UPS includes NEMA 5-15R and NEMA 5-20R outlets. These
outlets provide the connected equipment with AC line power during normal
operation and battery power during blackouts and brownouts. The UPS protects
equipment connected to these outlets against damaging surges and line noise.
If there is an active serial or USB connection to the UPS, it is possible to
remote reboot connected equipment by turning the outlets OFF and ON using
Tripp Lite’s PowerAlert Software. The outlets are divided into one or more load
banks (labelled “LOAD 1,” etc.) which may be remotely switched OFF and ON
without interrupting power to equipment connected to the other outlets. Outlets
labeled “UNSWITCHED” may not be remotely switched off.
Communications Ports (USB or RS-232): These ports connect the UPS to any
workstation or server. Use with Tripp Lite’s PowerAlert Software and included
cables to automatically save open files and shut down equipment during a
blackout. Also use PowerAlert Software to monitor a wide variety of AC line
power and UPS operating conditions. Consult the PowerAlert Software manual or
contact Tripp Lite Customer Support for more information. See USB and
RS-232 Serial Communications in the Optional Installation section for
installation instructions.
EPO (Emergency Power Off) Port: The UPS features an EPO port that may be
used to connect the UPS to a contact closure switch to enable emergency
inverter shutdown. See Optional Installation section for installation instructions
Accessory Slot: Remove the small cover panel from this slot to install optional
accessories to remotely monitor and control the UPS. Refer to the accessory’s
manual for installation instructions. Contact Tripp Lite Customer Support at
www.tripplite.com/support for more information, including a list of available
SNMP, network management and connectivity products.
Ground Screw: Use this to connect any equipment that requires a chassis
ground.
18-01-271-933440.indb 15 1/25/2018 3:23:26 PM
Loading ...
Loading ...
Loading ...