Loading ...
Loading ...
Loading ...
www.PyleUSA.com6
Notes for instaIIation, test and tips
1. Installation
a. This product is applied to 12V battery vehicles,
please read manual carefully before installation.
b. To insure the length of cables t the vehicles
and convenience of routing cables, please
install control box at the left trunk.
c. Please connect cables as Wiring Diagram.
2. Test
a. If the system didn't work please check and insure
all cables connected properly.
b. If the system can’t detect the obstacles behind
the vehicle, please check sensors if properly in
upward position.
3. Tips
a. Please have a test rst on this system before
operating.
b. If dirt, rain or snow builds up on the sensor, the
sensor may not function properly.
If water droplets, snow or mud adhere to the
sensor and its components, rinse with water
and wipe with a dry cloth.
c. When reversing down a steep slope or driveway,
graveI, lawn and/or the road surface may cause
momentary detection signals due to the sensors
following the sloping angle of the vehicIe which
may cause false alarm.
d. Sensors can’t detect well on sponge, gIossy
sphere, spiky objects or very tiny obstacles.
Loading ...
Loading ...