Loading ...
Loading ...
Loading ...
Door Removal
Installing your new appliance
In case your home access door is too
narrow for the refrigerator to pass
through, remove the refrigerator doors
and drawers. If you do not need to
remove the appliance doors, proceed
to 'Installing Water Lines' on page 8. If
you need to remove the doors,
continue below.
Tools you will need(Not provided)
Allen Wrench (5/32",4mm)
Philips Screwdriver
Wrench (5/16",8mm)
1. With the door closed, remove the 3
screws holding the top cover (A) with
Philips (+) screw driver, and then
remove the top cover with the entire-
harness attached.
2. Remove the 3 screws (B) fixed on the
hinges with a wrench (5/16", 8mm) and
1 ground screw (C) attached to the
hinge with Philips (+) screw driver.
Remove the upper left and right door
hinges(D).
3. Using both hands, open both
refrigerator compartment doors more
than 90 degrees, then lift the door up
and off. Store the doors in a safe place
to avoid damage.
>90°
11
Loading ...
Loading ...
Loading ...