Loading ...
Loading ...
Loading ...
11
cold water is too much.
water comes out.
Air clearance
between the unit and
the wall
The ventilation around the
apparatus is insufficient.
Space the unit from the wall by
more than 15 centimeters at each
side of the unit.
Water separator in
the cold tank
The cold water separator has
moved in the cold water
tank
Replace the water isolator at the
correct position.
Water bottle
The temperature of water
supplied (in the bottle) is too
high.(when the bottle is
exposed to direct sunlight
for a long time)
Put the water at a
shady, cool place
Ice-making
Both Ice-making and cold water
function are running at same
time.
Wait some more moment or stop
ice-making function first.
Ice making only not
available
Ice Button and Ice
indicator on the
control panel
Ice-making function is not
turned on by the button.
Press the Ice-making button.
Cold water function
Both Ice-making and cold water
function are running at same
time.
Wait some more moment or stop Cold
Water function first.
Compressor not run or
suddenly stops
Main power supply
Voltage too low
Contact electrician and electricity
department
Ventilation opening
blocked
Blocked
Remove the block substance
Clearance around the
unit
Too small clearance, bad air
circulation
Leave enough (Min. 15cm) space
around the unit
Condenser
Too dirty, produce overheated
Clean
Cooling system
Refrigerant over charged or
leaked
Contact with qualified serviceman to
repair it.
Compressor and its
accessory
Breakdown
Call serviceman to check and repair it.
Warn indicator illuminate
and buzz sounds
Water bottle
There is no water.
Replace with a new bottle full with
drinkable water.
Warn indicator flash on the
control panel
Ice-making box in the
ice making chamber
The ice making box is clogged
by the ice or mechanism
Stop the unit and wait for more time
to let the clogged ice melt.
Water leaks from the
taps or the faucet
Water faucet button
Water faucet button maybe
has been clogged, can not
act smoothly.
Check it, let the button go out.
Water faucet
The water faucet has been
damaged.
Call the service or the sale agent
telephone number to let them
change a new one.
Water is dripping out of
the water dispenser and
Water bottle
The bottle may has small
pin holes.
Change to a new bottle.
Loading ...
Loading ...
Loading ...