Loading ...
Loading ...
Loading ...
C
P
P
P
R
X
X
WARNING: ALWAYS VERIFY THE SYSTEM SOLIDITY IN EVERY CONFIGURATION
WARNING: ALWAYS VERIFY THE SYSTEM SOLIDITY IN EVERY CONFIGURATION
3.1 STACKING ON DIFFERENT SUBWOOFERS (OTHER THAN HDL35-AS)
1. Screw all three plastic feet “P”.
2. Secure the flybar to the safety bracket using the linchpins “X” and block them with the cotter pins “R”.
3. Adjust the feet to stabilize the flybar on the subwoofer then block them with thieir nuts to avoid unscrewing.
4. Assemble the HDL 26-A speaker with the same procedure.
2. Select the inclination angle (positive angles indicate a lower inclination of the speaker) and secure it with the rear
quick lock pin “P”.
To obtain the speaker inclination (positive or negative) you need to match the stacking bar angle value with the same
angle value stated on the speaker rear bracket.
This method works for every inclination except for angles 10 and 7 of the stacking bar, for which you need to proceed in
the following way:
- angle 10 of the stacking bar needs to be matched with angle 0 on the speaker rear bracket.
- angle 7 of the stacking bar needs to be matched with angle 5 on the speaker rear bracket.
Loading ...
Loading ...
Loading ...